Water Purification
Ferric Chloride Anhydrous is hydrolised in dilute solution forming a precipitate of Ferric Oxide. This precipitate absorbs suspended particles (clay, organic matter, etc) flocculates and carries, the absorbed particles to the bottom. It also removes sulphides and Silica.

Sewage Sludge Treatment
Ferric Chloride Anhydrous is used to increase the rate of settling of sludge in town sewage, by the process of hydrolysis forming Ferric Hydroxide which acts as a coagulant.

Industrial Effluents Treatment
Generally industrial effluent are either acidic or alkaline and the treatment of such effluents is, usually a costly and cumbersome multi-stage operation requiring a number of chemicals. Ferric, Chloride Anhydrous because of its flocculating and deodorizing properties, can be used directly, in a single-stage operation replacing the traditional cumbersome process.

Off-shore Oil Drilling
To release entrapped oil from crevices and rocks below the sea bed Ferric Chloride Anhydrous can, be used by feeding it into the drilling well. It decomposes and reacts with the rocks, releasing the entrapped oils which are removed by the normal process.
Ferric Chloride Anhydrous can be used as a disinfectant, pigment & cattle feed-additive.

Photo-engraving & Printed Circuit Board
Ferric Chloride Anhydrous can be used as an etching agent for photo-engraving and printed circuitry.

Glass & Ceramics
Ferric Chloride Anhydrous can be used to produce surface on ceramics.

Glycerine
Ferric Chloride Anhydrous can be used in the manufacture of glycerine.

Catalyst & Chlorination
Ferric Chloride Anhydrous can be used as a catalyst, mordant, oxidizing, chlorination and condensing agent.

Disinfectant & Cattle Feed-additive
Ferric Chloride Anhydrous can be used as a disinfectant & cattle feed-additive.

Colour Pigment
Ferric Chloride Anhydrous can be used in colour pigment manufacture.